Campbell-scientific AP200 CO2/H2O Atmospheric Profile System Manual de usuario Pagina 88
- Pagina / 120
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Appendix D. Output Tables
RawData
The RawData table stores each sample of the AP200 data (two records per
second). This table is normally used only for troubleshooting. The files on the
card and in the CPU are allocated to use remaining available space. The
number of days for which space is available on the card will depend on the
options chosen. The first set of values is always stored in RawData. The air
temperature profile data are stored as determined by constant N_AirTemps.
The remaining values are stored only if the constant SaveAll_diagnostics =
True. This constant may be set to False to reduce the amount of data stored or
set to True to allow more detailed analysis of diagnostic values for
troubleshooting. See Section 5.4.2, Compile Switches, for details on setting
program constants. A 2GB card will store over 50 days with all diagnostics, or
over 100 days if SaveAll_diagnostics = False. The actual table fill time for
the RawData table can be seen in the datalogger status table by either using
LoggerNet or with a keyboard display.
TABLE D-4. Variables of the RawDataTable
Name Units Statistic
When Used in
Calculation
When Included in Table
TIMESTAMP TS always
RECORD RN always
valve_number Smp last sample always
smpl_counter Smp last sample always
diag_AP200 Smp last sample always
CO2 ppm Smp last sample always
H2O ppt Smp last sample always
cell_tmpr °C Smp last sample always
cell_press kPa Smp last sample always
Td_cell °C Smp last sample always
Td_ambient °C Smp last sample always
sample_flow ml·min
-1
Smp last sample always
pump_press kPa Smp last sample always
panel_tmpr °C Smp last sample always
batt_volt V Smp last sample always
T_air(1) °C Smp last sample N_AirTemps > 0
T_air(2) °C Smp last sample N_AirTemps > 1
T_air(3) °C Smp last sample N_AirTemps > 2
T_air(4) °C Smp last sample N_AirTemps > 3
T_air(5) °C Smp last sample N_AirTemps > 4
T_air(6) °C Smp last sample N_AirTemps > 5
T_air(7) °C Smp last sample N_AirTemps > 6
D-8
- INSTRUCTION MANUAL 1
- Limited Warranty 3
- Assistance 4
- Precautions 5
- Figures 9
- Table of Contents 12
- AP200 CO 13
- O Atmospheric Profile 13
- 3. Initial Inspection 14
- 4. Overview 14
- 4.1.2 Optional Components 16
- 4.1.3 Common Accessories 18
- 4.1.4 Other Accessories 21
- 4.1.5 Support Software 21
- 4.1.6 Replacement Parts 22
- 4.2 Theory of Operation 23
- 4.2.1 Intake Assemblies 25
- Ambient Pressure (kPa) 26
- 4.2.2 Valve Manifold 27
- 4.2.3 Pump Module 28
- 4.3 Specifications 30
- 5. Installation 32
- 5.1.2 AP200 Enclosure 33
- 5.1.3 Intake Assemblies 33
- 5.2 Plumbing 35
- 5.2.2 Zero and CO 37
- 5.2.3 H 38
- 5.3 Wiring 39
- 5.3.2 Intake Heater Cables 40
- 5.3.3 Power 44
- 5.4 Configure the Program 46
- 5.4.2 Compile Switches 49
- 5.6 Verify Performance 50
- 5.6.3 On-site System Checks 51
- 6.1 Automatic Zero and Span 52
- 6.2 Manual Zero and Span 53
- 6.2.2 Do CO 54
- 6.2.3 Do CO 55
- 6.2.4 Do H 56
- 7.1 Plumbing Leaks 58
- 7.2 Enclosure Desiccant 59
- 7.3 Intake Filters 59
- 7.4 LI-840A (IRGA) 62
- 7.4.2 Configuring the IRGA 63
- 7.5 Zero/Span Flow 64
- 8. Repair 65
- CONFIG CO2_SPAN_PPM ppm CO 79
- Appendix D. Output Tables 81
- Appendix H. Using Swagelok 105
- Fittings 105
- Back ferrule 107
- Front ferrule 107
- Pf 101046.30007.1 111
- J.1 Introduction 113
- J.2 Removal 113
- J.3 Installation 116
Relacionado con productos y manuales para Instrumentos de medición Campbell-scientific AP200 CO2/H2O Atmospheric Profile System
Instrumentos de medición Campbell-scientific Bowen Ratio Instrumentation Manual de usuario
(36 paginas)
(36 paginas)
Instrumentos de medición Campbell-scientific CHP1 Pyrheliometer (from Kipp & Zonen) Manual de usuario
(23 paginas)
(23 paginas)
Instrumentos de medición Campbell-scientific CDM-VW300 Series Dynamic Vibrating-Wire Analyzer S Manual de usuario
(122 paginas)
(122 paginas)
Instrumentos de medición Campbell-scientific CM3 Kipp and Zonen Pyranometer Manual de usuario
(16 paginas)
(16 paginas)
Instrumentos de medición Campbell-scientific CMP6-L, CMP11-L, and CMP21-L Pyranometers Manual de usuario
(42 paginas)
(42 paginas)
Instrumentos de medición Campbell-scientific CM6/CM10 Tripod Weather Station Installation Manual de usuario
(68 paginas)
(68 paginas)
Instrumentos de medición Campbell-scientific CPEC200's EC155 Gas Analyzer's Packing I Manual de usuario
(1 paginas)
(1 paginas)
Instrumentos de medición Campbell-scientific CR10TCR Thermocouple Reference Manual de usuario
(10 paginas)
(10 paginas)
Instrumentos de medición Campbell-scientific CPEC200 Quickstart Guide Manual de usuario
(16 paginas)
(16 paginas)
Instrumentos de medición Campbell-scientific CR10XTCR Thermocouple Reference Manual de usuario
(12 paginas)
(12 paginas)
Instrumentos de medición Campbell-scientific CPEC200 Closed-Path Eddy-Covariance System Manual de usuario
(112 paginas)
(112 paginas)
Instrumentos de medición Campbell-scientific CR200/CR200X-series Dataloggers Manual de usuario
(208 paginas)
(208 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.038 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales