Campbell-scientific AP200 CO2/H2O Atmospheric Profile System Manual de usuario Pagina 25

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 120
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 24
AP200 CO
2
/H
2
O Atmospheric Profile System
4.2.1 Intake Assemblies
The AP200 intake assembly (pn 27693) includes a heated rain diverter, an
inline filter, an orifice, and a mixing volume on a common mounting bracket
with rain cover, shown opened in FIGURE 4-18. The inline filter element, pn
29998, is a 2.5-cm (1.0-in) diameter, PTFE membrane with a 3-micron pore
size. It removes particulates from the air sample that could clog the orifice or
valve.
FIGURE 4-18. AP200 intake assembly shown open
The orifice has a diameter of 0.18 mm (0.007 in) to restrict flow to a
maximum of approximately 247 standard ml•min
-1
at sea level. The flow will
be reduced at higher elevations due to the lower atmospheric pressure. The
nominal ambient pressure as a function of elevation is shown in FIGURE 4-19.
13
Vista de pagina 24
1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 119 120

Comentarios a estos manuales

Sin comentarios