Campbell-scientific LoggerNet Datalogger Support Software Manual de usuario descargar pdf (Pagina 207)

Section 6. Network Status and Resolving Communication Problems

6.4.1 Selecting the PakBus Network to View

When PakBus Graph is opened, it is set to view the first PakBus network on

the computer on which the datalogger support software is running. If more

than one PakBus network is set up on the computer, the different networks can

be viewed individually by selecting a port name from the PakBus Network

drop-down list. If the PakBus ports set up in the software have been bridged,

the resulting single port will be named “__global__”.

PakBus Graph also can be opened independently from the software toolbar, by

double-clicking the PakBusGraph.exe in the software’s program files directory

(e.g., C:\Program Files\CampbellSci\PakBusGraph). If opened independently,

the host computer to which PakBus graph should connect can be selected from

File | Select Server on the PakBus Graph menu.

The Select Server option has the following settings:

Server Address – The name of the computer with which to connect. This

must be the valid name of an existing computer or a TCP/IP address (in the

form ###.###.###.### consisting of the IP network number, ###.###.###, and

the host number, ###).

User Name – Your user name on the software server.

Password – Your password for the software server.

The User Name and Password fields are required only if your server

administrator has set up security on your system.

6.4.2 Dynamic and Static Links

There are two types of links to PakBus dataloggers that the server recognizes:

static links and dynamic links. Static links (depicted using red lines) are the

communication links to dataloggers that have been set up in the software, but

which have not been confirmed by communicating with the datalogger(s). You

will see these dataloggers listed in the software’s network map. Dynamic links

(black lines) are communication links to dataloggers that have been confirmed.

You may also see links to leaf node dataloggers that have not been set up in the

software, but which the server has “learned about” by querying the PakBus

network.

6.4.3 Viewing/Changing Settings in a PakBus Datalogger

If you right-click a device in PakBus graph, you will be presented with a

floating menu. From this menu, select Edit Settings to display a list of the

PakBus settings for the datalogger. Some of these settings are read-only, but

other settings can be changed. Click within the cell for a setting, enter a new

value, and then press return to make a change. If the change is accepted, the

cell will appear green. If the change was denied (which likely means the

setting is read-only), the cell will appear red.

6-17

1 2 ... 202 203 204 205 206 207 208 209 210 211 212 ... 579 580

Sin comentarios

Campbell-scientific LoggerNet Datalogger Support Software Manual de usuario Pagina 207