Campbell-scientific NL240 Wireless Network Link Interface Manual de usuario descargar pdf (Pagina 25)

NL240 Wireless Network Link Interface

• Type edit and press Enter to edit the settings of the NL240.

• As each NL240 setting is shown, press Enter to accept the current value

shown in parenthesis. Type a new value and press Enter to change the

value.

• After progressing through all of the NL240 settings, type save to accept

the changes or cancel to discard the changes.

• Type bye to exit Telnet.

7.4 Configuring the NL240 via RS-232

Accessing the configuration terminal menu via RS-232 requires

the NL240 to be power cycled, so physical access to the device

will be required. A null modem serial cable will be needed; one

is not provided with the NL240.

• Using a null modem serial cable, connect your computer’s serial port to

the port labeled “RS-232” on the NL240.

• Connect to the NL240 using a terminal emulator. DevConfig’s “unknown”

device type or HyperTerminal are examples of simple terminal emulators.

The default settings for this interface are 115200 baud, 8 stop bits, no

parity, 1 stop bit, no flow control.

• Power cycle the NL240 and repeatedly press Enter at the terminal.

• Type help to see a list of the functionality available when connected to the

NL240 through Telnet.

• Type edit and press Enter to edit the settings of the NL240.

• As each NL240 setting is shown, press Enter to accept the current value

shown in parenthesis. Type a new value and press Enter to change the

value.

• After progressing through all of the NL240 settings, type save to accept

the changes or cancel to discard the changes.

• Disconnect your computer and power cycle the NL240.

8. Operation

This section describes how to configure the Wi-Fi connection and operational

mode of your NL240. See Section 6, Wi-Fi, for more information about the

types of Wi-Fi connections available. See Section 4, Overview, for help in

determining which operational mode to use.

NOTE

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 73 74

Sin comentarios

Campbell-scientific NL240 Wireless Network Link Interface Manual de usuario Pagina 25