Campbell-scientific NL240 Wireless Network Link Interface Manual de usuario descargar pdf (Pagina 17)

NL240 Wireless Network Link Interface

Campbell Scientific’s LoggerNet software is used to communicate with the

dataloggers once the NL240 is configured properly and connected to a

network.

Bridge Mode

• Allows access to datalogger’s internal IP functionality when a peripheral

port is not accessible. For example, accessing the HTTP/webpage, email,

and FTP capabilities of a CR800/850, ET107, RAWS, or CS110.

Serial Server

• Allows access to a CR10X over a Wi-Fi network (RS-232 serial server)

when used in conjunction with an RS-232 to CS I/O (ME) adapter like the

SC32B or SC105.

• Allows access to a serial sensor over a Wi-Fi network (RS-232 serial

server).

• Allows access to an RF500M Base over a Wi-Fi network (RS-232 serial

server).

PakBus® Router

• Allows access to a CR10X-PB over a Wi-Fi Network.

• Allows access to a CR200X over a Wi-Fi Network.

• Allows you to connect to a PakBus® Device on the RS-232 port and a

PakBus Device on the CS I/O port using only one TCP port.

• Allows a PakBus® device on the RS-232 port and a PakBus device on the

CS I/O port to communicate with each other without routing through the

WLAN.

• Allows multiple computers to concurrently talk to PakBus® devices

connected to the RS-232 and CS I/O ports.

TLS Proxy Server

• Adds an encrypted WLAN interface to a datalogger that supports CS I/O

IP (bridge mode) communications.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 73 74

Sin comentarios

Campbell-scientific NL240 Wireless Network Link Interface Manual de usuario Pagina 17