Campbell-scientific OBS-5+ Sediment Concentration Monitor and Pressure Manual de usuario descargar pdf (Pagina 18)

OBS-5+ System

data with a PC or uploading data from the OBS-5+, 5) importing data into a

spreadsheet, and 6) plotting data with OBS-5+ Utility.

6.2.2 Running the OBS-5+ Utility

1) Set PC to the time standard for your project.

2) Select the OBS-5+ program to start the OBS-5+ Utility and open the Data

Window and Toolbar with the View pull-down menu.

3) The OBS-5+ Utility will create a new data log file and prompt you to

accept the name (see FIGURE 6-3). Files are automatically named with

Greenwich Date and Time as follows: OBS5+_20010808_172433.log. Or

you can create your own file name and destination by choosing N

o (see

FIGURE 6-4). Data received from the OBS-5+ while it is connected to the

PC will be stored in this file.

FIGURE 6-3. New data log prompt

FIGURE 6-4. Designating your own file name and destination

4) Connect the OBS-5+ to a PC with the test cable (FIGURE 6-1).

5) Click

Connect/Disconnect to get a green light and synchronize the

OBS-5+ clock with your PC by clicking

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 51 52

Sin comentarios

Campbell-scientific OBS-5+ Sediment Concentration Monitor and Pressure Manual de usuario Pagina 18