Campbell-scientific P2546A-L Anemometer Manual de usuario

P2546A-L Anemometer8/12 Copyright © 2012Campbell Scientific, Inc.

P2546A-L Anemometer 3. Select P2546A and select the right arrow to add it to the list of sensors to be measured then select next. 4. Select the ou

P2546A-L Anemometer 5. Wire according to the wiring diagram generated by SCWin Short Cut. 5. Overview The P2546A-L cup anemometer is a sturdy devi

P2546A-L Anemometer The P2546A anemometer is manufactured by Windsensor and cabled by Campbell Scientific. Lead length for the P2546A is specified wh

P2546A-L Anemometer Nonlinearity: < 0.04 m/s Temperature Influence (-15° to 60°C): < 0.05 m/s 6.1 Calibration Standard: U=A0+B0×f ,

P2546A-L Anemometer TABLE 7-1. Connections to Campbell Scientific Dataloggers Pulse Channels Color Wire Label CR800 CR850 CR5000 CR3000 CR10

P2546A-L Anemometer The following table lists the multiplier and offset to obtain meters per second (m/s) when the pulse count instruction is configur

P2546A-L Anemometer 'Call data tables CallTable Test NextScan EndProg 8. Troubleshooting Symptom: No wind speed 1. Check that the s

P2546A-L Anemometer 10. References IEC 61400 Part 12-1, “Wind turbine generator systems Part 12: Wind Turbine Power Performance Testing”. The followi

P2546A-L Anemometer 12

Campbell Scientific Companies Campbell Scientific, Inc. (CSI) 815 West 1800 North Logan, Utah 84321 UNITED STATES www.campbellsci.com • info@campbel

Warranty “PRODUCTS MANUFACTURED BY CAMPBELL SCIENTIFIC, INC. are warranted by Campbell Scientific, Inc. (“Campbell”) to be free from defects in materi

Assistance Products may not be returned without prior authorization. The following contact information is for US and international customers residing

Table of Contents PDF viewers: These page numbers refer to the printed version of this document. Use the PDF reader bookmarks tab for links to spec

P2546A-L Anemometer 1. Introduction The P2546A is a Class 1 anemometer used in wind energy applications. It primarily provides wind speed resource

P2546A-L Anemometer 4. Quickstart 4.1 Step 1 — Mount the Sensor To mount the sensor, do the following. 1. Mount a CM202, CM204, or CM206 crossarm t

P2546A-L Anemometer 4.2 Step 2 — Use SCWin ShortCut to Program Datalogger and Generate Wiring Diagram The simplest method for programming the datalog