Campbell-scientific HydroSense II Support Software User Guide Manual de usuario Pagina 75

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 82
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 74
Section 8. Operating System Updater
8.2 Discovering the Device
To send an operating system to the device, it must be powered on in “boot
loader” mode. The procedure to do so is as follows:
Make sure the HydroSense II is turned off
Press and hold the up arrow button
With the up arrow still depressed, press and hold the power button for two
seconds
The HydroSense II will power on in “boot loader” mode and flash the LCD
display.
The device will remain in this mode for two minutes. Return to the software
and press the Discover button. The device should be displayed with its serial
number.
8-3
Vista de pagina 74
1 2 ... 70 71 72 73 74 75 76 77 78 79 80 81 82

Comentarios a estos manuales

Sin comentarios