
Appendix C. Output Variables
at seven records per sequence, and sequences run every hour). The CPU has
storage allocated for 500 records (3 days).
The zero_span table is defined only if VALVE_MODULE = True. As a
result, only the last five values, associated with the scrub module, are optional
depending on the SCRUB_MODULE compile switch.
The value of the compile switches as shown in TABLE C-3 depends on the
constants as described in Section 5.4.2, Compile Switches. The code shown in
the table can be either V, S, or a combination of two of the codes.
V is defined if VALVE_MODULE = True
S is defined if SCRUB_MODULE = True and
VALVE_MODULE = True
TABLE C-3. Values stored in table zero_ span
Date and time the record was measured
Status of the zero/span sequence (see Section 6.2, Automatic
Zero and Span, for details)
Valve number (0 to 6); determines which zero/span valve is
selected
Average differential pressure
Average source temperature
Fraction of time the pump was on
Average pump control value
Number of samples included in the averages for values
measured in the main scan
Maximum buffer depth during the output interval
Sample cell pressure measured with no flow; used to infer
valve flow
Average of zero/span flow control valve; can be from 0
(closed) to 1 (open)
Fraction of time the pump temperature was within its
operating range
Fraction of time the pump heater was on
Fraction of time the pump fan was on
C-6
Comentarios a estos manuales