Campbell-scientific CS300 Silicon Pyranometer Manual de usuario Pagina 16

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 28
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 15
CS300 Pyranometer
7. Route the sensor cable along the underside of the crossarm to the
tripod/tower, and to the instrument enclosure.
8. Secure the cable to the crossarm and mast using cable ties.
9. Remove the green cap after installing the sensor. Save this cap for
shipping or storing the sensor.
7.2.2.2 015ARM
1. Secure the 015ARM to the mast by tightening the U-bolt nuts.
2. Place the CS300 in the center of the 18356 base/leveling fixture.
Cable Tie
U-bolt Nuts
015ARM
Leveling Screws
Holes for
Mounting Screws
18356 Base
8
Vista de pagina 15
1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 27 28

Comentarios a estos manuales

Sin comentarios