Campbell-scientific MD485 RS-485 Multidrop Interface Manual de usuario descargar pdf (Pagina 59)

Appendix E. NL100 to MD485 Network

FIGURE E-3. LoggerNet NL100 to MD485 PakBus Networking Setup

MD485 Configuration

5) Active Ports – “CS I/O and RS-485”

6) Communication Mode – “PakBus Networking”

7) CS I/O Port Configuration – SDC7 or SDC8

8) RS-485 Port Configuration – Desired baud rate

NL100 Configuration

7) RS-485 config – “PakBus”

8) RS-485 bps – Desired baud rate

9) RS-485 beacon interval – 60

10) Ethernet 10aseT – “enabled”

11) 10BaseT port IP address – NL100 IP address

12) 10aseT port network mask– NL100 network mask

13) PakBus/TCP server config – “enabled”

14) PakBus/TCP server port number – May be left at default, but must

match what is entered in LoggerNet Setup

The other NL100 options can be left in their default state.

E-5

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 67 68

Sin comentarios

Campbell-scientific MD485 RS-485 Multidrop Interface Manual de usuario Pagina 59