Campbell-scientific SC105 9-pin to RS232 DCE Interface Manual de usuario

SC105 CS I/O to RS-232 InterfaceRevision: 11/13 Copyright © 2004-2013Campbell Scientific, Inc.

SC105 CS I/O to RS-232 Interface SC105 - SW Version 2.0 Main Menu: Current Configuration (1) CS I/O Port Configuration [Modem Enable] (2) RS-232 Por

SC105 CS I/O to RS-232 Interface Additionally, there will be a ‘dead time’ after DTR is dropped of 2 seconds when data coming in on the RS-232 will be

SC105 CS I/O to RS-232 Interface TABLE 5-1. Approximate Range, miles and km Data Rate 19 Gauge (0.9 mm) 24 Gauge (0.5 mm) 26 Gauge (0.4 mm) bps

SC105 CS I/O to RS-232 Interface enclosures models ENC10/12, ENC12/14, or ENC16/18). Spark gap wiring is straight through such that pin to pin contin

SC105 CS I/O to RS-232 Interface 5.3 Testing RAD Modem Communication The modem communication link is divided into the following three sections: 1)

SC105 CS I/O to RS-232 Interface 6. CDMA Modem Application In most modem applications, the SC105 can be used with the factory defaults. This sets th

SC105 CS I/O to RS-232 Interface 10

Campbell Scientific Companies Campbell Scientific, Inc. (CSI) 815 West 1800 North Logan, Utah 84321 UNITED STATES www.campbellsci.com • info@campbel

Warranty “PRODUCTS MANUFACTURED BY CAMPBELL SCIENTIFIC, INC. are warranted by Campbell Scientific, Inc. (“Campbell”) to be free from defects in materi

Assistance Products may not be returned without prior authorization. The following contact information is for US and international customers residing

Table of Contents PDF viewers: These page numbers refer to the printed version of this document. Use the PDF reader bookmarks tab for links to spec

SC105 CS I/O to RS-232 Interface 1. General Description FIGURE 1-1. SC105 CS I/O to RS-232 Interface The SC105 (FIGURE 1-1) is used to interface a

SC105 CS I/O to RS-232 Interface 2. Specifications RS-232 9-Pin Male Connector Pin-out: Pin No. I/O Name Description 1 In DCD Data Carrier Det

SC105 CS I/O to RS-232 Interface RS-232 Baud Rates: The SC105 will support the following baud rates: 1200, 9600, 19200, 38400, 57600, and 115200 RS-2