Campbell-scientific CS700 Tipping Bucket Rain Gage and CS700H Heated R Manual de usuario descargar pdf (Pagina 11)

CS700 and CS700H Rain Gage

3.5”

1.5”

24”

14”

FIGURE 3-3. Pedestal Base Options

3.3 Leveling

Level the rain gage after mounting it. To level, remove the housing assembly

from the base by loosening the three housing screws and lifting the housing

upward. Adjust the three nuts on the CM240 bracket to level the gage. A

bullseye level is mounted on the rain gage’s base to facilitate leveling (see

Figure 3-4).

Remove the rubber shipping band and cardboard packing securing the tipping

bucket assembly. Tip the bucket several times to insure the tipping mechanism

is moving freely. Replace the housing assembly and tighten the three screws

to secure the housing to the base.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 41 42

Sin comentarios

Campbell-scientific CS700 Tipping Bucket Rain Gage and CS700H Heated R Manual de usuario Pagina 11