Campbell-scientific SDM-IO16 16-Channel Input/Output Expansion Module Manual de usuario descargar pdf (Pagina 29)

SDM-IO16 16 Channel Input/Output Expansion Module

36: If time is (P92) ;if 5 minutes remain

1: 10 Minutes (Seconds --) into a ;out of 15 minute

2: 15 Interval (same units as above) ;interval

3: 12 Set Flag 2 High ;set flag 2

37: If Flag/Port (P91) ;if flag 2 is set

1: 12 Do if Flag 2 is High

2: 30 Then Do ;then

38: Beginning of Loop (P87) ;start fan loop

1: 0 Delay

2: 5 Loop Count

39: Z=F (P30) ;put a '1' into fan control

1: 1 F ;location

2: 0 Exponent of 10

3: 20 -- Z Loc [ Fan_1 ]

40: End (P95) ;end fan loop

41: End (P95) ;end 'then do'

42: If time is (P92) ;reset flag 2 at the

1: 0 Minutes (Seconds --) into a ;end of the 15 minutes

2: 15 Interval (same units as above)

3: 22 Set Flag 2 Low

;End fan control logic based on time

;Input locations 10 to 24 are now loaded

;with a '1' or '0' to set ports on the SDM-IO16

;Omit this instruction if using an older datalogger

;see below

43: SDM-IO16 (P188)

1: 00 SDM Address

2: 94 Command Code Option ;set the ports from locations

3: 0000 Ports 16-13 ;port settings not used for 94

4: 0000 Ports 12-9

5: 0000 Ports 8-5

6: 0000 Ports 4-1

7: 27 Return Code Loc [ ErrCount ] ;for return code

8: 10 First Loc [ Heat_1 ] ;for control values

9: 1.0 Mult

10: 0.0 Offset

;Alternatively for older dataloggers P104 could be used

;Remove the above and uncomment this instruction

;43: SDM-CD16 (P104) ;send instructions to the

;1: 1 Reps ;SDM-IO16 with address 00

;2: 00 Address

;3: 10 Loc [ Heat_1 ]

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 43 44

Comentarios a estos manuales

Sin comentarios

Campbell-scientific SDM-IO16 16-Channel Input/Output Expansion Module Manual de usuario Pagina 29

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Campbell-scientific SDM-IO16 16-Channel Input/Output Expansion Module